Laser 6869 Safety Locking Wire 0.8mm x 30m

Product Information

Crimp and cut: The ferrule is crimped and the cable is cut flush with the end of the ferrule. Discard excess cable and the job is complete. Safety wire must never be overstressed. It will break under vibrations if twisted too tightly. Safety wire must be pulled taut when being twisted, and maintain a light tension when secured. NOTE: Use copper wire where a seal is necessary on emergency equipment to show no person has used the equipment. Emergency equipment includes portable fire extinguishers, first aid kits, emergency valves, and oxygen regulators. Safety wire twister When you use an anchor lug, the wiring must start at the lug and the lug must align with the wire. The wire must not cause radial movement of the lug.

FAR 52.209-5: Daniels Manufacturing Corporation is not presently debarred, suspended, proposed for debarment, or declared ineligible for award under Federal contracts.

Thread: A cable assembly is threaded through the fasteners in a direction which will exert a positive or neutral pull when tension is applied Defence Standard 00-970 Part 1 Section 4 Issue 2 (PDF) (Issue 2ed.). Ministry of Defence. 1 December 1999. pp.12–14.

The system works by providing pre-cut lengths of safety wire that have a large cap on one end. The cable is threaded through a hole on the fastener to be secured, which is large enough to accommodate the wire but too small for the cap on the other end of the cable to pass through it. After the other end of the wire is passed through the anchor point, the technician takes an extra ferrule and the special tool that is available from Daniels and crimps the ferrule onto that end of the wire. In the same motion, the ferrule is crimped and the remaining cable is cut. Again, the end cap is too large to pass through the hole that the wire passed through, and thus the cable is secured. Insert: The ferrule is threaded on the cable and the cable is inserted through the nose of the tool FAR 52.222-25: Daniels Manufacturing Corporation has developed and has on file Affirmative Action Programs. Malin Co. is a wire manufacturing company with ISO 9001:2015 certification, so you can trust us to meet the quality and performance standards of your project. If you are looking for safety wire in an alloy that is not listed here, we are capable of quoting for other materials. If you are unsure of what materials you are looking for, get in touch with Malin Co. today, and our team can answer any questions you have to ensure you get the best product for the job.Some existing structural equipment or emergency devices for the safety of flight require copper or brass safety wire (0.015 to .020 inch diameter only), where the successful emergency operation of the equipment is dependent on shearing or breaking of the safety wire. Additionally, aluminum wire of .031 inch diameter, copper wire of .020 inch diameter, and similar types of wire function as seals on specific forms of equipment. This includes portable fire extinguishers, first-aid kits, emergency valves, and equipment with similar construction. Find sources: "Safety wire"– news · newspapers · books · scholar · JSTOR ( April 2010) ( Learn how and when to remove this template message)